Boca Raton based 100% woman owned Call or text (860) 918-4238

Sand

Mason Sand

Brick and block work, mortar, play areas and pool bases.

Fine, clean, washed sand with a consistent grain. Soft enough to work by hand, which is why it ends up in mortar, in sandboxes and under above-ground pools.

Mason sand is finer than concrete sand and will not do the same job. Where a mix design calls for concrete sand, mason sand will weaken it. Where a bricklayer asks for mason sand, give them mason sand.

Specification

What you are getting.

Gradation
Fine washed sand, ASTM C144
Category
Sand
Weight
1.35 tons per cubic yard
Sold by
The cubic yard, 1 yd minimum
Compaction allowance
None, placed loose
Also called
brick sand, mortar sand, play sand

Common uses

What people order it for.

  • Mortar for brick and block
  • Sandboxes and play areas
  • Above-ground pool bases
  • Paver joint filling
  • Volleyball courts

How much to order

Coverage per cubic yard.

One cubic yard is 27 cubic feet. How far that goes depends entirely on how deep you are laying it.

Depth1 cu yd coversYards per 500 sq ft
2 in162 sq ft3.1 cu yd
3 in108 sq ft4.6 cu yd
4 in81 sq ft6.2 cu yd
6 in54 sq ft9.3 cu yd
12 in27 sq ft18.6 cu yd

The arithmetic: length times width times depth, all in feet, divided by 27. A 40 by 20 ft area at 4 inches deep is 40 × 20 × 0.333 ÷ 27, which is about 9.9 cubic yards, so you order 10. Round up rather than down — coming up two yards short on a Friday costs a whole extra delivery.

Run your own numbers →

Mason Sand — common questions

What people ask.

What is Mason Sand?

Fine, clean, washed sand with a consistent grain. Soft enough to work by hand, which is why it ends up in mortar, in sandboxes and under above-ground pools.

What is Mason Sand used for?

Brick and block work, mortar, play areas and pool bases. Mason sand is finer than concrete sand and will not do the same job. Where a mix design calls for concrete sand, mason sand will weaken it. Where a bricklayer asks for mason sand, give them mason sand.

How much Mason Sand do I need?

Multiply length by width by depth, all in feet, and divide by 27 to get cubic yards. One cubic yard covers 162 sq ft at 2 inches, 108 sq ft at 3 inches, 81 sq ft at 4 inches or 54 sq ft at 6 inches. The calculator does it for you and converts to tons and truckloads.

Does Mason Sand need a compaction allowance?

No. Mason Sand is placed loose rather than compacted, so what you order is what you end up with. Order your plan volume, rounded up to the next whole cubic yard.

How much does Mason Sand cost delivered?

$35.00 per cubic yard, plus a flat $200 delivery per order across Palm Beach, Broward and Miami-Dade. Minimum order is one cubic yard.

What does Mason Sand weigh?

About 1.35 tons per cubic yard. A tri-axle carries roughly 18 cubic yards or 22 tons, whichever it reaches first, so a full load of Mason Sand is about 16.3 cubic yards.

Do you deliver Mason Sand near me?

We deliver anywhere from West Palm Beach to Miami — Palm Beach, Broward and Miami-Dade counties. See the service area for lead times by county.

Where we deliver Mason Sand

West Palm Beach to Miami.

Related materials

Also in Sand.

All 21 materials →

Ready when you are.

Get your load priced
in sixty seconds.

Pick your material, enter how many cubic yards and see the delivered number before you talk to anyone.